MS Channels

  /    /  MS Channels

MS Channels

We offer our patrons a comprehensive range of MS Channels manufactured from the finest quality raw-material. Our range of MS Channels including Industrial MS Channel, Construction MS Channel, Engineering MS Channel & Various Fabrications MS Channel are used in wide array of applications.

The JPL structural steel products(JPL Brand) are currently available through our dealer network located strategically across india.

Product Range

Length Range: Standard size of 12mtr to 12.2mtr. 11 m to 13 m, 5.5m to 6.5m also available. Customized length could be supplied based on stream circumstances.

Grade of Material: As per IS: 2062, FE410WA, Grade: A/E250 to E410. Higher grade material can be supplied – EN Series, ASI Series & DIN Standards.

Size Tolerance/Weight Tolerance: As per BIS Standard IS: 1852

Marking / Identification of product: Every structural section is embossed (hot rolling) with size detail, ISI mark and company’s mark “JPL” along the length at regular intervals.

Chemical Composition

Chemical Symbol % Limit
Carbon C 0.23% Max
Manganese Mn 1.5% Max
Silicon Si 0.40% Max
Sulphur S 0.055% Max
Phosphorus P 0.055% Max. (Tolerance: ± 0.005)
Physical Properties
Material will be supplied in semi-killed / killed(Al.) condition with limiting carbon equivalent 0.42% Max.
Min. Yield Strength 250 Mpa
Min. Tensile Strength 410 Mpa
Min. % Elongation 23%

Weldability: Weldable with common M.S. Electrodes without pre-heating.

Marking/Identification of Product: Every structural section is embossed (hot rolling) with size details, ISI mark and company’s logo/mark along the length at regular interval.

Quality/ Test Certificate: All products are attached with a mandatory test certificate as per IS:2062 stipulations. However, third party inspection, if desired by purchaser, can be organized at the plant before dispatch.

Ordering Information

While placing an order, the following technical information would be needed

–  Size & length of each piece and quantity.

–  Steel specification with grade/chemical composition/physical properties.

–  Test certificates requirement.

–  Special requirements if any.

Miguel Andujar Womens Jersey